You can refuel your generator without removing the GenTent — just use the built-in refueling flap. Look for the GenTent logo on the canopy; the flap is directly beneath it.

To refuel safely:

• Turn off the generator and allow it to cool completely before refueling.
• Lift the flap below the GenTent logo to access the fuel cap.
• Refuel carefully while the canopy remains in place, keeping the generator protected from rain or snow.
• Once finished, wrap the flap around the canopy edge and press it back into place using the Velcro® strips.
• Make sure the flap is fully sealed before restarting your generator.

For more guidance, refer to your GenTent manual or view our installation videos.